04Products & Solutions
Built to a drawing, not to a catalogue
Three product families, each engineered to the site or the assembly line it serves. Everything below has been designed, fabricated and delivered by Thimark.
01Environmental
Environmental & Water Management
Plant equipment for water supply, wastewater and hydropower intakes, designed to the site, not to a catalogue.
Hydraulic Trash Screens
Powered raking for intake structures and headworks.
Automated Rotary Trash Screens
Continuous debris removal on high-flow channels.
Trash Cleaners & Racks
Bar racks with automated hydraulic cleaning systems.
Sludge Scrapers
Circular and chain scrapers for clarifier tanks.
Sluice & Penstock Gates
Cast and fabricated gates with manual or geared actuation.
Effluent Handling Equipment
Screens, weirs and channel furniture for treatment works.
Pneumatic Conveyors
Material transfer for process and treatment plant.
Dust Bag Filters
Extraction and filtration units for industrial process air.
02Automotive
Automotive & Agricultural Engineering
OEM component manufacture for local assembly lines, plus structural work for commercial and agricultural vehicles.
Vehicle Chassis & Structural Components
Fabricated frames and load-bearing assemblies.
Custom OEM Components
Brackets, stands, fenders, handlebars, hangers, guards and latches.
Tractor Attachments
Implement frames and mounting hardware.
Two-Wheeler Sub-Assemblies
Kitted, inspected and delivered to line schedule.
03Heavy Steel Fabrication
Heavy Steel Fabrication
CIDA EM2 graded structural work, from roof frameworks to pressure-retaining vessels.
Industrial Steel Buildings
Portal frames, purlins and cladding support steel.
Roof Frameworks
Trusses and space frames fabricated to drawing.
Pressure Vessels
Fabricated to specification with documented procedures.
Heavy Tanks
Storage and process tanks for industrial sites.
04OEM Parts Catalogue
Filter the range by assembler
A representative selection of two-wheeler components currently supplied to Sri Lanka's motorcycle assembly lines. Hover a part to see the client it ships to.
- BajajCT100 · Pulsar N160
- SenaroGN125 · Click 150i
- RanomotoActive 100 · Pattaya · Moped
Filter
20 parts shown
- P-01Brackets
Engine Mounting Bracket
- Material
- 2.5 mm HR steel
- Finish
- Powder coated
Bajaj CT100
David Pieris Motor Company Lanka Ltd
- P-02Mounts
Rear Carrier Hanger
- Material
- 3 mm HR steel
- Finish
- Powder coated
Bajaj CT100
David Pieris Motor Company Lanka Ltd
- P-03Stands
Centre Stand Assembly
- Material
- Ø22 CDW tube
- Finish
- Black e-coat
Bajaj CT100
David Pieris Motor Company Lanka Ltd
- P-04Stands
Side Stand Assembly
- Material
- Ø19 CDW tube
- Finish
- Black e-coat
Bajaj CT100
David Pieris Motor Company Lanka Ltd
- P-05Guards
Chain Guard
- Material
- 1.6 mm CR steel
- Finish
- Powder coated
Bajaj CT100
David Pieris Motor Company Lanka Ltd
- P-06Body Panels
Rear Fender Inner
- Material
- 1.2 mm CR steel
- Finish
- Powder coated
Bajaj Pulsar N160
David Pieris Motor Company Lanka Ltd
- P-07Brackets
Silencer Mounting Bracket
- Material
- 3 mm HR steel
- Finish
- Zinc plated
Bajaj Pulsar N160
David Pieris Motor Company Lanka Ltd
- P-08Mounts
Footrest Bracket, LH/RH
- Material
- 4 mm HR steel
- Finish
- Powder coated
Bajaj Pulsar N160
David Pieris Motor Company Lanka Ltd
- P-09Controls
Handlebar, Standard
- Material
- Ø22.2 CDW tube
- Finish
- Chrome / powder
Senaro GN125
Senaro Motor Company (Pvt) Ltd
- P-10Controls
Seat Lock Latch
- Material
- 2 mm CR steel
- Finish
- Zinc plated
Senaro GN125
Senaro Motor Company (Pvt) Ltd
- P-11Brackets
Battery Box Bracket
- Material
- 1.6 mm CR steel
- Finish
- Powder coated
Senaro GN125
Senaro Motor Company (Pvt) Ltd
- P-12Body Panels
Front Fender Stay
- Material
- 2 mm CR steel
- Finish
- Powder coated
Senaro Click 150i
Senaro Motor Company (Pvt) Ltd
- P-13Mounts
Leg Shield Support
- Material
- 1.6 mm CR steel
- Finish
- Powder coated
Senaro Click 150i
Senaro Motor Company (Pvt) Ltd
- P-14Stands
Main Stand, Scooter
- Material
- Ø22 CDW tube
- Finish
- Black e-coat
Senaro Click 150i
Senaro Motor Company (Pvt) Ltd
- P-15Stands
Centre Stand, Moped
- Material
- Ø19 CDW tube
- Finish
- Black e-coat
Ranomoto Moped
Ranomoto / Ranatunga Motors (Pvt) Ltd
- P-16Controls
Rear Grab Rail
- Material
- Ø19 CDW tube
- Finish
- Chrome / powder
Ranomoto Active 100
Ranomoto / Ranatunga Motors (Pvt) Ltd
- P-17Guards
Engine Guard Frame
- Material
- Ø16 CDW tube
- Finish
- Powder coated
Ranomoto Active 100
Ranomoto / Ranatunga Motors (Pvt) Ltd
- P-18Mounts
Number Plate Hanger
- Material
- 1.6 mm CR steel
- Finish
- Powder coated
Ranomoto Pattaya
Ranomoto / Ranatunga Motors (Pvt) Ltd
- P-19Body Panels
Front Fender
- Material
- 1.2 mm CR steel
- Finish
- Powder coated
Ranomoto Pattaya
Ranomoto / Ranatunga Motors (Pvt) Ltd
- P-20Brackets
Headlamp Mounting Bracket
- Material
- 2 mm CR steel
- Finish
- Zinc plated
Ranomoto Pattaya
Ranomoto / Ranatunga Motors (Pvt) Ltd
Start a project
Need a part we don't list?
Most of what Thimark makes started as somebody else's drawing. Send yours: material, gauge, quantity and the date you need it on the line.